Fly Killers
Just in case you can’t stop all the the flies getting in, here are solutions to getting rid. All fly-killers should be regularly serviced to be ensure proper operation and optimum hygiene. All UV lamps deteriorate over time and need to changed annually so they provide more of a lure than your other room lighting. We can provide an annual maintenance on all flykiller regardless of where you have purchased them. Each service will be accompanied by the service-dated label for Environmental Health Inspectors.
Ex-Fly Covert Glueboard Fly Killer 40W
satin stainless steel
The Ex-Fly Covert is a glueboard flykiller which attracts flying insects using 2 low-energy, EL4, UV lamps (20W each) which will cover an area of approx 200m2. This low energy fly-killer costs less to run than standard UV fly-killers by using low energy lamps and without the electrically charged killing grid. The glueboard silently traps flies without the annoying noise associated with zapping fly killers. As flies are trapped on the glue board, they do not cause a contamination risk from exploding flies or debris being dislodged by air movement. Glueboards depending on usage should be changed every 4-6 weeks
Ex-Fly Uplighter Glueboard Fly Killer 20W
WHITE
The Ex-Fly Uplighter is designed to be as unobtrusive as possible. This fly-catcher’s appearance is that of a standard wall uplighter light with the benefit of trapping flies on the hidden glueboard. This glueboard is hidden from sight. The low-energy 20W lamp is inexpensive to run and can cover a range of approx 40m2. Fly killer glueboards should be changed every 4-6 weeks. White.
FlyShieldTM Solo Glueboard Fly Killer 18W
SATIN STAINLESS STEEL
The FlyshieldTM Solo is a countertop mounted flykiller which uses a glueboard to trap flies after being attracted in by the UV light. This small fly killer is ideal for homes and small kitchens of up to 90m2 and works using low-energy light. Its attractive design will not look out of place in any kitchen. Glueboards should be changed every 4-6 weeks.
FlyShieldTM II Glueboard Fly Killer 36W
SATIN STAINLESS STEEL
FlyshieldTM 2 is attractively designed to lure flying insects to within the flykiller by UV light and then trap them on the glueboard behind the stainless steel facia – out of sight. Flyshield 2 can be wall mounted or ceiling-hung using chains provided. Operated using two low-energy 18W UV lamps with a range of approximately 200m2 when ceiling mounted. Glueboards should be changed every 4-6 weeks.
FlyShieldTM IV Glueboard Fly Killer 72W
SATIN STAINLESS STEEL
FlyshieldTM 4 is the largest version of this attractively designed flykiller. It is ceiling mounted using the included chains and attracts flies by UV light and then trap them on the glueboard behind the stainless steel facia – out of sight. Operated using four low-energy 18W UV lamps with a range of approx 400m2. Glueboards should be changed every 4-6 weeks.
Ex-Fly Covert Glueboard Fly Killer 40W
WHITE
The Ex-Fly Covert is a glueboard flykiller which attracts flying insects using 2 low-energy, EL4, UV lamps (20W each) which will cover an area of approx 200m2. This low energy fly-killer costs less to run than standard UV fly-killers by using low energy lamps and without the electrically charged killing grid. The glueboard silently traps flies without the annoying noise associated with zapping fly killers. As flies are trapped on the glue board, they do not cause a contamination risk from exploding flies or debris being dislodged by air movement. Glueboards depending on usage should be changed every 4-6 weeks.
Ex-Fly Uplighter Glueboard Fly Killer 20W
SATIN STAINLESS STEEL
The Ex-Fly Uplighter fly catcher is designed to be as unobtrusive as possible. The fly killer appearance is that of a standard wall uplighter light with the benefit of trapping flies on the hidden glueboard. This glueboard is hidden from sight. The low-energy 20W lamp is inexpensive to run and can cover a range of approx 40m2. Glueboards should be changed every 4-6 weeks. Satin Stainless Steel.